CABLE CLAMPDescription: This clamp consists of two flat pieces of metal with grooves inside, which, when assembled, form a sort of metal sandwich. It comes cadmium-plated and galvanized. Buying information: This is used for making loops at the end of cable. The clamps have grooves in various sizes (commonly 1/8 inch, 3/16 inch, and 1/2 inch) into which you can lay the cable. How-to hints: Make sure to select the correct size clamp: if it's too big, the cable could slip out. You can use an extra clamp below the first and also secure either or both of these with a plastic tie. |
GENERAL HARDWARE SECTION Description of Contents Introduction Braces Cabinet Door Parts Casters Chain And Accessories Clamps Closet Door Parts Door Locks Doorstops Drapery Parts Drawer Parts Framing Fasteners Garage Door Parts Gutter Handles Hasps Hinges Metals Nails Nuts And Bolts Plant Hangers Rivets Rope, Cord And Accessories Screening Screw Eyes And Hooks Screws Shelf Supports Springs Storm & Screen Door Parts Wall Fasteners Weather Stripping Window Parts Wire Wire Fencing Miscellaneous OTHER HARDWARE SECTIONS ELECTRICAL PLUMBING ADHESIVES, PATCHES & MORE SAFETY |